order-place-anim.gif (2134 bytes)

 

Revised September 22nd, 2012

 

 Rebuilt Spindles & Related Parts

Bus & Vanagon


Remanufactured King Pin Spindles

Related Kin Pin Spindle Parts

Used/Reconditioned Spindles and Related Parts - Type 2 1968 to 1979

Spindle Related Parts - Vanagon 2WD 1980 to 1991

Spindle Related Parts - Vanagon Syncro 1986 to 1991

 

 

Remanufactured King Pin Spindles

Worn King Pins are a major cause of excessive steering play and wandering. King Pin Spindles should be greased every 1200 miles and chances are your Bus' previous owner rarely performed this operation. The problem is that new king pins have been discontinued long ago and can be very hard to find. And when you do find them them, the price is in the stratosphere! To correct this problem, we offer completely rebuilt spindles for your Bus or Pickup at a price that is far more economical to your wallet. First, we measure each and every king pin to determine it's usability, adhering to strict tolerances. There are over a dozen different wear sizes to consider when grinding them and the reams used when installing the bushings. Then, with those king pins that are useable, we precision grind them to a micro-polished finish on a Landis OD Grinding Machine explicitly made for this purpose, rather than using a lathe which cannot produce such a finish or be as accurate. New silicone-bronze bushings are then machined and reamed for a tolerance fit of .0007". They are then re-assembled with new seals, stop screws, zerk fittings and other necessary hardware so that it is a complete bolt-on operation for the customer. When sold to the customer, we provide a very detailed set of instructions for a trouble-free installation. We feel that our rebuilt spindles are the best quality investment you can make when repairing your front end. Does not include Link Pin Kit which can be purchased separately new.  Rebuilt spindles are sold exchange. The core charge is IN ADDITION to the price of the item.  See our Core Policy before ordering.

Part No. Description Price

211-498-301AX  Rebuilt Spindles, March 1955 to 1963  $299.10 Pair Plus $150.00 Core 

211-498-301CX  Rebuilt Spindles, 1964 to 1967  $299.10  Pair Plus $150.00 Core 

211-498-041A  New Link Pin Kit, 1964 to 1967  $135.00 (Does Both Sides)

211-498-041 New Link Pin Kit 1955-1963 $190.00 (Does Both Sides)

NOTE: If you purchase new link pins with rebuilt spindles, we can press the link pin bushings into the spindles for an additional $25.00 labor charge. We can also press out your old link pin bushings from your core spindles and send them back to you for an additional $15.00 labor charge (plus shipping).

Please see our Core Policy before ordering - click here: Bus Boys Core Policy

Related King Pin Spindle Parts

Part No. Description Price

211-405-627  Front Inner Wheel Bearing March 1955 to 1963  $27.75 each

211-405-625  Front Inner Wheel Bearing 1964 to 1967  $13.45 each

211-405-631  Spacer, Front Inner Bearing, Used 1950 to 1963  $5.00 each
Note: Your Wheel Seal rides against this spacer providing a sealing point to prevent losing your bearing grease. If severely grooved, they should be replaced, otherwise even new seals will be torn up. On 64-67 Models this is a permanently machined area onto the spindle and is not replaceable.

111-405-627  Front Outer Wheel Bearing March 1955 to 1963  $19.20 each

211-405-645D  Front Outer Wheel Bearing 1964 to 1967  $7.90 each

211-498-060  Front Wheel Seal Kit March 1955 to 1963  NLA

211-498-061  Front Wheel Seal Kit 1964 to 1967  $4.55
Note: Wheel Seal Kits come with Seal, Thrust Washer and Lockplate for one (1) side

211-405-671  Front Axle Nut, Left Side March1955 to 1963  $2.00 each

211-405-672  Front Axle Nut, Right Side March 1955 to 1963  $2.00 each

211-405-671A  Front Axle Nut, Left Side 1964 to 1967  $4.75 each

211-405-672A  Front Axle Nut, Right Side 1964 to 1967  $4.75 each

211-405-681  Axle Nut Lockplate March 1955 to 1963  $1.15 each

111-405-681  Axle Nut Lockplate 1964 to 1967  $1.40 each

211-405-691  Spindle Dust Cap, Left March 1955 to 1963  $6.00 each

211-405-692  Spindle Dust Cap, Right March 1955 to 1963  $6.00 each

211-405-691A  Spindle Dust Cap, Left 1964 to 1967  $9.00 each

211-405-692A  Spindle Dust Cap, Right 1964 to 1967  $9.00 each

211-405-439  King/Link Pin Seal March 1955 to 1967  $2.00 each

211-405-527U  Adjustment Shim, Link Pin, Used March 1955 to 1963  $0.25 each

211-405-527AU  Adjustment Shim, Link Pin, Used 1964 to 1967  $0.25 each

Used/Reconditioned Spindles and Related Parts - Type 2 1968 to 1979

Part No. Description Price

211-405-311CU  Left Spindle, Used 1968 to 1970  $35.00

211-405-312CU  Right Spindle, Used 1968 to 1970  $35.00

211-405-311EU  Left Spindle, Used 1971 to 1972  $35.00

211-405-312EU  Right Spindle, Used 1971 to 1972  $35.00

211-405-311FU  Left Spindle, Used 1973 to 1979  $35.00

211-405-312FU  Right Spindle, Used 1973 to 1979  $35.00

211-405-625  Front Inner Wheel Bearing 1968 to 1979  $8.80 each

211-405-631AU  Spacer, Front Inner Bearing, Used 1968 to 1970  $15.00 each

211-405-631BU  Spacer, Front Inner Bearing, Used 1971 to 1979  $15.00 each
Note: Your Wheel Seal rides against this spacer providing a sealing point to prevent losing your bearing grease. If severely grooved, they should be replaced, otherwise even new seals will be torn up. Cleaned and inspected.

211-405-645D  Front Outer Wheel Bearing 1968 to 1979  $10.60 each

211-405-641D  Front Wheel Seal 1968 to 1979  $4.75 each

311-405-661  Thrust Washer, Outer Bearing 1968 to 1979  $1.45 each

211-405-669  Front Axle Nut, Left 1968 to 1979  $10.00 each

211-405-670  Front Axle Nut, Right 1968 to 1979  $10.00 each

211-405-691A  Spindle Dust Cap, Left 1968 to 1970  $2.00 each

211-405-692A  Spindle Dust Cap, Right 1968 to 1970  $1.10 each

211-405-691B  Spindle Dust Cap, Left 1971 to 1979  NLA

211-405-692B  Spindle Dust Cap, Right 1971 to 1979  $7.50 each

211-405-319U  Eccentric Bushing-Spindle To Upper Ball Joint, Used 1968 to 1979  $10.00ea
Note: Dust Caps and Eccentric Bushings are used/reconditioned - cleaned & cad plated

Spindle Related Parts - Vanagon 2WD 1980 to 1991

Part No. Description Price

113-517-185C  Inner Wheel Bearing 1980 to 1991  $20.00 each

211-405-645D  Outer Wheel Bearing 1980  to Early 1984 (To VIN 25-E-015000)  $7.25 each

251-405-645B  Outer Wheel Bearing Late 1984 to 1991 (From VIN 25-E-015001)  $9.50 each

281-407-641C  Wheel Seal Early 1980 (To VIN 25A0024011)  $6.00 each

251-407-641A  Wheel Seal Late 1980 to 1991 (From VIN 25A0024012)  $4.05 each

251-407-671  Front Axle Nut L or R 1980 to 1991  $3.25 each

Spindle Related Parts - Vanagon Syncro 1986 to 1991

Part No. Description Price

251-407-625  Wheel Bearing  $76.70 each

N 12350.1  Lockring For Wheel Bearing  $1.90 each

251-407-629  Wheel Seal (2 per spindle req.)  NLA

N 100853.01  Front Axle Nut Left or Right  $9.75 each

More Spindle Parts, especially for 1968 to 1991 models will be added to this page. Check back frequently.


 

Back To Home Page | Back To Online Catalog | Back To The Top | Email Us

Order Toll Free (800)792-2697  | Information (530)244-1616  |  24 Hour Fax (530)244-0933

 

Contents of this Webpage are Copyrightę 2005, Bus Boys, Inc. The Bus Boys Logo is a trademark« of Bus Boys, Inc., and may not be reproduced or used without the expressed permission of Bus Boys, Inc. Volkswagen is a registered trademark in the United States and other countries. Bus Boys, Inc., is not affiliated with, nor connected in any fashion with Volkswagen United States, Volkswagenwerk AG, Germany, nor any of it's established affiliates, dealers or subsidiaries. The use of "Volkswagen" and it's models on this Web Page is for purely descriptive purposes and the items listed herein are not Genuine Volkswagen products unless otherwise noted.