Revised April 3, 2008

Air Cooling System
Air Cooled Engines Through 1971

Air Cooling System

Additional Engine Tin

Click on letters to go directly to part description

Key Part No. Description/Application/Price

A. 113-119-025JU Fan Shroud, Used Through 1970 (Non-Doghouse Style) CALL

A. 113-119-025NU Fan Shroud, Used 1971 (Doghouse Style)  $55.00

B. N 10714.2 Attachment Screw w/ Washer  $0.20

- N 20092.1 Grommet, Accelerator Tube Hole  $1.00

C. 131-119-031 Cooling Fan Through 1970 (Non-Doghouse Style)  $19.40

C. 113-119-031B Cooling Fan 1971 (Doghouse Style)  $19.45

D. 113-119-240B  Fan Hub Kit, Includes Fan Hub, Washer And Nut  $10.00

E. 111-903-131A Hub Shim (Usually 3 Required)  $0.25

I. 043-198-261 Fan Backing Plate Kit (3 Pieces) For all models with 105mm Generator. 6 or 12 Volt (30Amp)  $7.75

I. 131-119-261U Fan Backing Plate Kit for 38 Amp Generator Only  CALL

J. N 12226.2 Spring Lock Washer 6mm  $0.06

K. N 10210.1  6mm Bolt  $0.10

L. 043-119-151U Thermostat Bracket, Used CALL

M. N 14455.9 Stud, Bracket to Case  $0.45

N. N 11525.2 8mm Flat Washer  $0.10

O. N 11008.2 8mm Nut  $0.10

P. 111-119-159A Thermostat Bellows, Original Style  $74.60

Q. N 10238.13 8mm Bolt  $0.20

R. 211-119-163AU Thermostat Rod, Used 1964 to 1971  CALL

S. 043-119-209U Left Thermostat Flap, Used 1964 to 1971  CALL

T. 113-119-210U Right Thermostat Flap, Used 1964 to 1967  CALL

T. 043-119-210CU Right Thermostat Flap, Used 1968 to 1970  CALL

T. 043-119-210BU Right Thermostat Flap, Used 1971 (Doghouse Style)   CALL

U. N 20022.3 Rubber Plug (One per Flap Required)  $0.75

V. N 11522.7 4mm Flat Washer  $0.04

W. 113-119-249 External Tooth Lock Washer  $0.45

X. 113-119-279 Return Spring  $2.78

Y. 113-119-289U Connecting Rod, Used 1964 to 1970  CALL

Y. 113-119-289BU Connecting Rod, Used 1971 (Doghouse Style)  CALL

Z. 211-259-283 Locking Spring For Connecting Rod 1964 to 1970 (4 Required)  $2.00

AA. 113-119-411AU Connector Piece, Left Thermostat Flap, Used 1971 (Doghouse Style)  CALL

AB. N 23623.1 Special Spring Locking Washer  NLA

AC. 211-119-217 Plastic Plug/Stop for Accelerator Tube 1971 Only  $1.25

Engine Tin
Air Cooled Engines Through 1971

Click on letters to go directly to part description

Key Part No. Description/Application/Price

A. 211-119-517BU Firewall Tin, Used 1964 to 1967  CALL

NOTE:  Has 38 mm hole on right side for pre-heat.  Block off hole with 113-119-581 rubber plug on 1964 to 1966 models or use 113-119-517RZ tin below.

A. 113-119-517RZ  Firewall Tin, Repro 1964 to 1967  $26.50

A. 113-119-517SU Firewall Tin, Used. For 1964 to 1967 Model With Doghouse Conversion  $7.00

B. 211-119-517DU Firewall Tin, Used 1968 to 1970  CALL

C. 211-119-515U Firewall Tin, Used 1971 (Doghouse Style)  CALL

D. 113-119-419U Doghouse Upper Exit Duct, Used   CALL

E. 113-119-431U Doghouse Lower Exit Duct, Used  CALL

D/E. 113-119-419KZ Doghouse Exit Tin. Upper and Lower Set Repro  $22.55

F. 113-119-543Z 2 Piece Seal Kit  for Doghouse Exit Ducts  NLA

G. 211-119-303BK Cylinder Cover Tin for Single Port Models Through 1970 (Pair)  $28.90

G. 113-119-303BK Cylinder Cover Tin for Dual Port Models 1971  $27.50

H. 311-119-317AK Lower Air Deflector Tin (Pair)  $2.75

J. 131-119-357U Rear Air Baffle Plate, Used Left  CALL

J. 113-119-358AU Rear Air Baffle Plate, Used Right  CALL

K. 211-119-577U Heat Riser Cover, Used Left  CALL

K. 211-119-578U Heat Riser Cover, Used Right  CALL

L. 113-119-599 Gasket, Heat Riser Cover (Small)  NLA

M. 113-119-599A Gasket, Heat Riser Cover (Large)  NLA

N. 043-119-351BK Lower Hot Air Channel Set, Repro.  Left and Right (3 Pieces)  $32.65

O. 113-119-533GZ Small Pulley Tin Breastplate, Repro 1964 to 1967   $7.75

O. 113-119-533H Small Pulley Tin Breastplate, Repro 1968 to 1971   CALL

P. 113-119-523FU Large Pulley Tin, Used 1964 to 1967  CALL

NOTE: Has 38mm hole for carb pre-heat used on 1964 to 1966 models. Block off hole with 113-119-581 rubber plug on 1967 models. 

P. 113-119-523DZ Large Pulley Tin, Repro 1967 (Does not have 38mm or 52mm pre-heat hole)  $22.85

Q. 113-119-523MU Large Pulley Tin, Used 1968 to 1971 (with 52mm pre-heat hole)  CALL

R. 113-119-585A Grommet, Fresh Air Heater Hose and Pre-Heat Hose Through Pulley Tin   $2.11

S. 113-119-571 Grommet, 25mm Carb Pre-Heat Hose to 1967 (For 38mm Hole)  $2.95

NOTE: Fits on either firewall tin or large pulley tin as applicable.

S. 113-119-581 Rubber Plug, 38mm for Capping Off Carb Pre-Heat Hole  $3.85

T. N 20092.1 Grommet, Accelerator Tube Hole  $1.00

U. N 20091.1 Grommet, Metal Fuel Line Hole In Firewall Tin  $1.00

V. N 10714.2 Screw/Washer, Engine Tin  $0.20

W. N 10210.1 6mm Bolt, Cooler Tin (2 Required)  $0.10

X. N 11524.4 6mm Flat Washer, Cooler Tin (2 Required)  $0.05

NOTE: NLA means No Longer Available.

Back To Home Page | Back To Online Catalog | Back To The Top | Email Us

Order Toll Free (800)792-2697  | Information (530)244-1616  |  24 Hour Fax (530)244-0933

Contents of this Webpage are Copyright© 2006, Bus Boys, Inc. The Bus Boys Logo is a trademark® of Bus Boys, Inc., and may not be reproduced or used without the expressed permission of Bus Boys, Inc. Volkswagen is a registered trademark in the United States and other countries. Bus Boys, Inc., is not affiliated with, nor connected in any fashion with Volkswagen United States, Volkswagenwerk AG, Germany, nor any of it's established affiliates, dealers or subsidiaries. The use of "Volkswagen" and it's models on this Web Page is for purely descriptive purposes and the items listed herein are not Genuine Volkswagen products unless otherwise noted.